|
|
|
|
|
|
| Rubber Sheet With Reinforcement |
|
|
|
|
|
|
|
| |
|
|
| |
| |
|
|
SILICONE RUBBER SHEET
|
Code:BS-Sil |
| Tensile strength |
6-10Mpa |
| Hardness |
50—80Shore A |
| Elongation |
200%--500% |
| Specific Gravity |
1.20—1.40g/cm3 |
| Tear strength |
17--25 N/mm |
| Working temperature |
-60/200℃ |
| thickness |
From 1 to 50mm |
| Width |
From 0.90 to 2.0m |
| Executable standard |
BS2752 - C40 |
| Surface Finished |
Smooth or cloth impression
|
|
| |
Properties:
• Excellent resistance to heat (dry air), at
+200 C continuous
• Resistant to ultra-violet light, ozone and
weathering.
• Exhibits low flammability and low smoke
toxicity.
• Good electrical insulation properties.
• making it the preferred choice of the
medical, pharmaceutical and food processing
industries.
• Silicones have comparatively low
mechanical properties, tensile strength,
elongation and tear strength, however they keep
constant even at high temperatures but should not
be used with high pressure steam.
• Resistance to chemicals; its resistance to
oils and hydrocarbon products is fairly limited
and similar to that of Chloroprene rubbers.
Reasonable resistance to a whole range of general
chemical products, but acids, alkalis, esters and
ketone should be avoided
|
|
| |
|
↑Top
|
| |
|
